Working with t he notebook
Setting up WLAN access
• Requirement: A WLAN must be available and you must have the
corresponding a ccess information.
Information on con figuring the WLAN access can be found in the
documentation for your operating system.
Access via UMTS
You can purchase the accesso
ries for UMTS reception from your retailer
or your Fujitsu Technology S
olutions dealer.
You will find information on e
stablishing the connection with the UMTS
network in the documentatio
n for the hardware used.
Your device can connect with the Internet via UMTS. To do this, use one of
the f ollowing types of connection:
• an integrated UMTS m odule ( depen ding on your model variant)
• a USB dongle (a USB stick with your mobile phone provider’s SIM card)
• a UMTS Expre ssCard (to be inserted in the ExpressCard slot of your device)
• a mobile en d-device (e.g. m obile phone with Bluetooth or cable connection)
Ethernet and LAN
EthernetLAN
The internal network module of your notebook supports Ethernet LAN. You can use it to
establish a connection to a local network (LAN = Local Area Network).
2
1
► Connect the network cable to the LAN
port of the notebook (1).
► Connect the network cable to your
network connection (2).
Your network administrator can help you to configure and use the LAN c onnections.
The network ca ble is not included in the delivery scope. This type of
cable c an be obtained from a specialist dealer.
Fujitsu Technology Solutions 47
To Next Page
Loading...
