Working w ith the notebook
ExpressCards
SlotExpressCard
An ExpressCard slot enables operation of an ExpressCard/34 or ExpressCard/54.
Consult the documentation supp lied by the ExpressCard’s manufacturer
and follow the instructions provided.
Never use force when installing or removing an ExpressCard.
Make sure that no foreign objects enter the ExpressCard slot.
Inserting the card
Keep the placeholder for the slot in a safe place. When you remove the card again y ou
must re install the placeholder. This prevents foreign bo dies from getting into the slot.
1
2
► If the eject but ton (1) is recessed, press it
once so that it d isengages. N ow press the
eject button again s o that the placeholder
protrudes slightly from the notebook.
► Pull the card placeholder out of the slot (2).
► Insert the card into the slot guide with
the connection contacts first.
► Ge ntly push the card into the slot either
until it will go no further or you feel it
engage. Do n ot use excessive force.
Depending on the type, the card may
protrude slightly from the slot.
Please see the docu m entation relating to t he card for driver installation inst ructions.
42 Fujitsu Technology Solutions
To Next Page
Loading...
