Why is my Fujitsu ScanSnap black and white scan the same size as color?
If the file size of a scanned black and white document is the same as a color document when using your Fujitsu ScanSnap, select the [Scanning] tab from the ScanSnap setup dialog box/window and change the setting for [Color mode] to [B&W].
How to fix Fujitsu Scanner ScanSnap when it cannot be turned on?
If your Fujitsu ScanSnap scanner won't turn on, ensure the power cable or USB bus power cable and USB cable are correctly connected. If using a USB hub, verify its power supply, using a powered hub with an AC adapter if a USB bus power cable is in use. Disconnect and reconnect the power cable or USB bus power cable, waiting at least five seconds before reconnecting. Also, ensure the ADF paper chute (cover) is open and that your computer has fully started, as the Scan button may be off during startup or hibernation.
How to remove moire patterns from Fujitsu ScanSnap scans?
If moire patterns appear in your scanned images with the Fujitsu ScanSnap, go to the ScanSnap setup dialog box/window, select the [Scanning] tab, and change the setting for [Image quality]. For example, change from [Normal] to [Best], then retry scanning.
What to do if Fujitsu ScanSnap is not recognized after ScanSnap Manager install?
If your Fujitsu ScanSnap scanner is not recognized even after installing ScanSnap Manager, and it's listed as 'Other Device' or 'Unknown Device' in Device Manager, go to Start menu, then Control Panel, then System and Maintenance, then Device Manager. Delete the device name (like USB device) under 'Other Device', and restart your computer.
Why is my Fujitsu ScanSnap scanner producing out of alignment images?
If the scanned image data from your Fujitsu ScanSnap is out of alignment or distorted, make sure documents are loaded correctly.
How to adjust brightness on Fujitsu ScanSnap scanner?
If the scanned image data from your Fujitsu ScanSnap is too light or dark, adjust the [Brightness (Black and White scanning only)] setting in [Option] in the [Scanning] tab within the ScanSnap setup dialog box/window.
How to remove vertical lines from Fujitsu ScanSnap scanned images?
If vertical lines appear in the scanned image data from your Fujitsu ScanSnap, the inside of the scanner might be dirty. Clean the inside of the ScanSnap.
How to resolve frequent multifeed errors on Fujitsu ScanSnap?
If you're experiencing frequent multifeed errors with your Fujitsu ScanSnap scanner, clean the pad assy. If the pad assy is worn out, replace it. Ensure the document stack is not thicker than 1 mm.
Why is my Fujitsu ScanSnap scanner scanning so slow?
If your Fujitsu ScanSnap scanner is running slowly, first ensure your computer meets the recommended system requirements. A slower scanning speed may also happen if the ScanSnap is connected via a USB 1.1 port; connect to a USB 2.0 port instead. Also, wait for the computer to completely start up before scanning. To increase scanning speed, disable the settings for 'Correct skewed character strings automatically', 'Allow automatic image rotation', 'Set the marked text as a keyword for the PDF file' and 'Convert to Searchable PDF' in the ScanSnap setup dialog box/window.
Why is paper not feeding in my Fujitsu ScanSnap scanner?
If paper isn't feeding correctly or stops midway in your Fujitsu ScanSnap scanner, try these steps: * Clean the pick roller. * Replace the pick roller if it is worn out. * Remove any debris from the document feeding path. For thick documents, slightly push the first sheet when scanning starts and change the feeding direction. Ensure the paper size setting matches your documents. Load documents one by one if they are thin, torn, or bent.
General| Film scanning | No |
|---|---|
| Color scanning | Yes |
| Maximum scan size | 216 x 360 mm |
| Scanner type | Sheet-fed scanner |
| Sensor type | CIS |
| ISO A-series sizes (A0...A9) | A4, A5, A6 |
| ISO B-series sizes (B0...B9) | B5, B6 |
| Maximum ISO A-series paper size | A4 |
| Auto document feeder (ADF) input capacity | 10 sheets |
| USB version | 2.0 |
| Standard interfaces | USB 2.0 |
| Scan media weight | 64 - 104.7 g/m² |
| Dimensions (WxDxH) | 284 x 99 x 77 mm |
| Power requirements | AC 100 - 240V, 50/ 60 Hz |
| Non-operating relative humidity (non-condensing) | 20 - 80 % |
| Minimum RAM | 512 MB |
| Minimum storage drive space | 2197 MB |
| Sustainability certificates | ENERGY STAR |
| Power consumption (standby) | 5 W |
| Power consumption (typical) | 9 W |
| Operating temperature (T-T) | 5 - 35 °C |
| Certification | RoHS |
Weight and Dimensions| Depth | 99 mm |
|---|---|
| Width | 284 mm |
| Height | 77 mm |
| Weight | 1400 g |
Details the main capabilities and advantages of the ScanSnap scanner.
Identifies and describes the physical components of the ScanSnap scanner.
Lists the hardware and software specifications needed to operate the ScanSnap.
Explains the procedure for powering the ScanSnap scanner on and off.
Details the supported document sizes and types for scanning.
Provides step-by-step instructions on correctly loading documents into the scanner.
Outlines the fundamental steps for scanning documents with the ScanSnap.
Overviews the software applications included with the ScanSnap.
Guides users through the installation process for the Scan to Microsoft SharePoint feature.
Provides instructions for installing trial versions of bundled software.
Explains the ScanSnap Manager icon, its status indicators, and basic operations.
Provides detailed steps for scanning documents using the ScanSnap.
Covers configuration of scan settings and preferences for the ScanSnap.
Describes various automated scanning actions and workflows.
Explores advanced and varied scanning techniques and features.
Explains the ScanSnap Manager icon in the Dock and its operations.
Provides detailed steps for scanning documents on Mac OS.
Covers configuration of scan settings and preferences on Mac OS.
Describes various automated scanning actions and workflows on Mac OS.
Explores advanced and varied scanning techniques on Mac OS.
Provides procedures for safely removing jammed documents from the scanner.
Offers a guide to diagnose and resolve common scanner issues.
Lists recommended cleaning supplies and their part numbers.
Explains the proper method for cleaning the scanner's outer surfaces.
Provides detailed steps for cleaning the internal components of the scanner.
Lists part numbers and recommended replacement intervals for consumables.
Step-by-step guide on how to replace the scanner's pad assembly.
Step-by-step guide on how to replace the scanner's pick roller.
Instructions for updating the ScanSnap Manager software.
Guides on how to remove bundled software from the system.
Summarizes the physical and electrical installation requirements.
To Next Page