20 SPARC Enterprise Mx000 Servers Product Notes for XCP Version 1121 • February 2016
RTIF1-
081016-002
O When FRUs are cold-replaced (with
the system off), (after poweron) the
monitor process might not generate
entries in the monitor message log
identifying the replacement operation
that has occurred.
No workaround is available.
RTIF1-
081225-001
OOOIn the settimezone -c adddst
command, when you set eight or
more letters to the abbreviation of
time zone and the name of Daylight
Saving Time, execution of the
showlogs command induces a
segmentation fault and results in an
error.
Specify the abbreviation of time zone
and the name of Daylight Saving Time
in seven letters or less.
RTIF1-
090108-003
OOODate and time of the Last Update
which displayed on the XSCF Web
may not be updated.
Please refresh the display.
RTIF1-
090427-005
OOOWhen you use the
setpasswordpolicy(8) command
and set "9999999999" (10 digits) in
Different Characters, the
showpasswordpolicy(8) command
displays "-1."
No workaround is available.
Use XSCF Web.
RTIF1-
090731-001
O While a DIMM correctable error (CE)
has been occurred, when XSCF
failover is started, a message "XSCFU
hang-up is detected" might
appear in the error log.
This error log can be safely ignored.
RTIF1-
100331-002
OOOWhen you start up a domain from a
disk that is connected to the 8 Gbps
fibre channel card (SE0X7F21F,
SE0X7F22F) and if it is unable to start
the domain due to causes such as disk
failure, an error log of "FRU:
/UNSPECIFIED" might be registered.
No workaround is available.
RTIF1-
110222-001
OOOIf setpasswordpolicy -r is set to 0,
existing XSCF users are unable to
change their password and get the
error message, password:
Operation failed.
Do not execute the command
"setpasswordpolicy -r 0".
TABLE 3-1 Known Issues and Workarounds in XCP 1121 (Continued)
ID M3000
M4000
M5000
M8000
M9000 Description Workaround
To Next Page
Loading...
