28 SPARC Enterprise Mx000 Servers Product Notes for XCP Version 1121 • February 2016
RTIF1-
070824-006
O O On the tab browser, to the same host,
when you perform multiple log-in
with the user accounts of different
user privileges, the user privilege of
the last log-in user account will be
applied to those pages which you've
already logged in.
When you use the tab browser, do not
perform multiple log-in to the same
host.
RTIF1-
070824-007
O O When you change configuration on
the XSCF Web, if you select cancel on
the confirmation dialog or perform
forced close, the original
configuration page may be
unavailable.
From the Menu, select the original
configuration page again.
RTIF1-
070824-008
O O On the [Domain Configuration]
screen, when you select an undefined
Domain ID, the Configuration Policy
remains as the content which
previously displayed.
None available at this time.
RTIF1-
070824-009
O On the [System Board Configuration]
screen, when you execute Detail, it is
displayed as if the CPUM and the
memory of MBU are all mounted on
the PSB#0 side. And in the detail
display of PSB#0, memory is
displayed as "22 + 2."
None available at this time.
RTIF1-
070824-011
O O While using Firefox 2, in the
Configuration policy setting on the
[Domain Configuration] screen, when
you specify a domain which is in
operation, an error display pop-up
appears. When you click on the [Back]
button on this error display pop-up
and click on the [Cancel] button on
the inquiry screen to re-display the
data, the system remains in the error
message screen.
From the Menu, select the [Domain
Configuration] page again.
RTIF1-
070904-001
O CLIs executed in Standby XSCF
should display
"Permission denied".
Only the following CLIs can be
executed on the Standby XSCF:
snapshot(8), switchscf(8).
Do not attempt to run any other CLI
on the Standby XSCF. Such attempts
will report various errors.
TABLE 3-3 XCP Issues Fixed in Releases Earlier Than XCP 1121 (Continued)
ID M3000
M4000
M5000
M8000
M9000 Description Workaround
To Next Page
Loading...
