32 SPARC Enterprise Mx000 Servers Product Notes for XCP Version 1121 • February 2016
RTIF1-
070914-014
O O On the XSCF Web, when you use a
user account without an appropriate
privilege to select [Snapshot], set the
parameters of [Start time] or [End
time] and execute the [Download]
button, it doesn't result in a privilege
error but the parameter error will be
displayed.
None available at this time.
RTIF1-
070914-015
O O On the XSCF Web, when you select
[User Manager] to add the user
account, the user name to be specified
is limited up to 20 characters.
To specify a user name of 20
characters or more, use the
adduser(8) command.
RTIF1-
070914-016
O O On the XSCF Web, when you select
[LDAP] to perform the LDAP
configuration, if you execute [Save]
while the [LDAP Search Timeout]
remains as its default value "0," it
results in "LDAP Configuration
Update Failed. Save LDAP
Configuration Data failed,"
and the setting can't be stored.
Since "0" is an invalid value in the
[LDAP Search Timeout], do not fail to
set a value other than 0.
RTIF1-
070914-017
O O On the XSCF Web, when you select
[LDAP] and input the [LDAP Search
Timeout] with a value which exceeds
the maximum 2147483647 seconds, it
doesn't result in parameter error.
None available at this time. The
maximum 2147483647 seconds will be
set to the [LDAP Search Timeout].
RTIF1-
070914-018
O O On the XSCF Web, when you use a
user account without an appropriate
privilege to select [LDAP] and execute
the [Delete] button, it results in a
privilege error but the configuration
information which has been displayed
will be cleared and seems as if
deleted.
The configuration is not deleted. To
show the configuration information
again, select [LDAP] from the Menu.
TABLE 3-3 XCP Issues Fixed in Releases Earlier Than XCP 1121 (Continued)
ID M3000
M4000
M5000
M8000
M9000 Description Workaround
To Next Page
Loading...
