Chapter 3 Information About Software 33
RTIF1-
070914-019
OOThe CLI 'showldap -c' (which
displays current LDAP certificates)
will show proper data only when
used with the same user account that
had originally provided certificate
information using 'setldap -c'. Any
other user account will generate
"Permission denied" error.
Similarly, the XSCF Web’s [LDAP
Configuration] pop-up screen will
display no data, when a different user
account is used.
Use the same user account for all
LDAP display or configuration
operations, for both CLI and XSCF
Web.
RTIF1-
070914-020
O O On the User Account setting page on
the [User Manager] screen, after the
password change resulted in "Change
Password Error," when you click
on the [REFRESH] button, there
appears the error message "No user.
The request is aborted."
To change the password, select [User
Manager] on the Menu again.
RTIF1-
070914-021
O O During the OpenBoot PROM process,
when you power off the domain, the
error log of Domain hang-up
detected (level3) may be
registered.
This error log can be safely ignored.
RTIF1-
070914-023
O O When you specify the domain ID or
XSB number which are not supported
on the server, there appears the
parameter error message.
Specify the available domain ID or
XSB number on the server.
RTIF1-
070914-024
O O When you display the physical tree on
the XSCF Web, the warning mark is
displayed on the link card for External
I/O expansion unit.
None available at this time.
RTIF1-
070914-026
O O The XSCFU cannot act as a reliable
NTP source for domains.
All domains should be configured to
use a NTP source other than the
XSCFU.
RTIF1-
070915-001
O O On the [Domain Configuration]
screen, when you newly define the
Domain Component List, the
parameter error may be displayed.
When you define the Domain
Component List, use CLI.
TABLE 3-3 XCP Issues Fixed in Releases Earlier Than XCP 1121 (Continued)
ID M3000
M4000
M5000
M8000
M9000 Description Workaround
To Next Page
Loading...
