Troubleshooting and tips
The Tablet PC stops working
TheTabletPCEnergy savingm ode
Cause Troubleshooting
The Tablet PC is in energy saving mode.
► Leave the energy saving mode: Press the
ON/OFF switch.
An application programme has caused the
malfunction.
► Close the application program or restart
the Tablet PC (by restarting the operating
system or switching the device off and back
on again).
The battery is dead.
► Charge the battery.
or
► Connect the mains adapter to the Tablet
PC.
The Tablet PC does not
respond to inputs.
► Restart the Tablet PC
manually (see "
Using
the Reset button",
Page 62)
The radio connection to a network does not work
Theradioc onnectionto anetwork doesnot work
Cause Troubleshooting
The wireless component is disabled.
► Switch the radio component on (see
"
Switching the wireless components on and
off", Page 26).
The wireless comp onent is enabled. Desp ite
this, the wireless connection to a network does
not work.
► Check that the wireless co nnection is
correctly set up via the Settings.
The battery
discharges too quickly
Battery:
Cause
Troubleshooting
You may hav
e an application running th at
consumes
a great deal of power due to frequent
accessin
g of radio, GPS or network conn ections.
► Use the mains adapter as frequently as
possible.
► Close unnecessary applications, reduce
the frequency o f the access to radio
components or the network or switch off the
radio components in a targeted way via the
settings.
The maximum brightness may have been set
for the screen.
► Reduce the brightness of the scree n to
lower energy consumption: you will find
the adjustment und er Settings > Display >
Brightness.
64 Fujitsu Tech nology Solutions
To Next Page
Loading...
Need help?
General