Accessories for your Tablet PC (opti
onal)
1
1
2
2
4
3
4
► Remove the caps from the screwholes on the back side of the Tablet PC (1).
► Put the spacers between the Tablet PC and the hand st rap (2).
► Position the hand strap on the Tablet PC (3). Make sure that the screw hole s of the
hand strap and of the Tablet PC line up exactly above one another.
Make sure to use screw type M2x8 for mounting the hand strap.
► Secure the hand strap with the screws (4).
Fujitsu 51
To Next Page
Loading...
