Security functions
Password protection for booting the op erating system
With the supe rvisor password you have set in th e BIOS Setup Utility (see
section "
Assig ning the supervisor and user passwords", Page 57), you can
also prevent booting o f the operating system.
Operating system
Activating system protection
► Start the BIOS Se tup U tility and go to the Security menu.
Operatings ystem
► Select the Password on Boot option and press the Enter key.
► Select the option you require (Disabled, First Boot or Every Boot) and p ress the enter key
If Disabled is selected, a password is not required, and you cannot prote ct
the system (deactivates system protection).
► Select the Save Chang
es & Exit option under Exit.
The Tablet PC reboots. You will be prompted to enter your password (the supervisor passwo rd).
Deactivating syst
em protection
► Start the BIOS Se tup U tility and go to the Security menu.
Operatings yste
m
► Select the Passw
ord on Boot option and press the Enter key.
► Select the Disabled option and press the Enter key.
Ifyoudonotwan
t to change any othe r settings, you can exit BIOS Setup Utility.
► Select the Save Changes & Exit option under Exit.
The Tablet PC r
eboots. The system is no longer passw ord-protected.
58 Fujitsu
To Next Page
Loading...
Need help?
General