Security functions
Assigning the supervisor and user passwords
► Start the BIOS Setup Utility and go to the Security menu.
► Select the Set Supervisor Passw ord field and press the Enter key.
With Enter new Password: y ou are asked to enter a password.
► Enter the password and press the Enter key.
Confirm new Password requires you to confirm the password.
► Enter the passwo rd again and press the Enter key.
Changes have been save d is displayed as a con firmation that th e ne w p assword has been saved.
► To set the use r password, select Set User Password and procee d exactly as
when configuring th e supervisor password.
If you do not want to change any other settings, y ou can exit BIOS Setup Util ity.
► In the Exit menu, select the opt ion Save Changes & Exit.
► Select Yes and press the Enter key.
PasswordSupervisorpas swor
d
Userpassword
The Tablet PC is rebooted and the new password is effective. It will now be necessary to
first enter your supervisor or user passwo rd in order to open t he BIOS Setup U tility . Please
note that the user password only provides access to a few of the BIOS settings.
Changing the supervisor password or user password
You can only change the supervisor password when you have logged into the
BIOS Setup Utility with the supervisor password.
PasswordSupervisorpasswordUserpassword
► Start the BIOS Setup Utility and go to the Security menu.
► When changing the password, proceed exactly as w hen assigning a password.
Removing passwords
To remove a password (without setting a new password) perf orm the following s teps:
PasswordSupervisor
password
Userpasswo
rd
► Start the BIOS Setup Utility and go to the Security menu.
► Highlight the Set Supervisor Password or Set User Password field and press the Enter key.
You will be requested to enter the current password by the Enter Current Password prompt.
Enter New Password will appear and you will be requested to enter a new passw ord.
► Press the Enter key twice at this request.
► In the Exit menu, select the opt ion Save Changes & Exit.
► Select Yes and press the Enter key.
The Tablet PC is rebooted and the password is removed.
Removing the supervisor password simultaneously deactivates the user password.
Fujitsu 57
To Next Page
Loading...
