Connecting external devices
Connecting USB devices
USBports
On the U SB ports you can connect e xter nal devices that also have a USB port
(e.g. a DVD drive, a printer, a scanner or a modem).
USB devices are hot-pluggable. This means you can connect and d isconnect the
cables of USB devices while the operating system is run ning .
USB 1.x has a m a ximum data tran sfer rate of 12 Mbps.
USB 2.0 has a data transfer rate of up to 480 Mbps.
USB 3.0 has a data transfer rate of up to 5 Gbps.
Additional information can be found in the docum entation for the USB devices.
► Connect the data cable
to the
external device.
► Connect the data cable to a USB port
on the Tablet PC or cradle.
Device driver
s
USB devices w i
ll be autom atically recognized and installed by your operating s ystem.
How to remove USB devices correctly
Always correctly remove the device according to the rules described below,
to ensure that none of your data is lost.
► Tap the symbol for s afe removal of the hardware.
► Select the device you wish to shut down and remove.
► Tap OK.
Wait for the dialog box which tells you that it is now safe to remove the device.
Fujitsu 63
To Next Page
Loading...
