Security functions
Smart Card reader (device dependent)
SecurityfunctionsSecurityfunctions
SmartCards are not supplied as standard equipment. Yo u can use all SmartCa rds that comply with
the ISO standard 7816-1, -2 or -3. These SmartCards are a vailable from various manufacturers.
With the appro priate software you can use your SmartCard as an alternative to p assword protection,
but also as a digital signature, for encrypting your e-mails or for home banking.
We recom m end that you always use two SmartCards. Always keep one of the SmartCards
in a safe place if you are carrying the other SmartCard with you.
In order to be able to take advantage of all the security features of your Tablet
PC, you will need a CardOS SmartCard from Fujitsu.
The SmartCard can only be used with a PIN, so maximum protection is maintained
even when the SmartCard is lost. In order to maximize your security, t he CardOS
SmartCard is disabled if three incorrect attempts are m ade to enter the PIN.
During first time use of your CardO S SmartCa rd, you must either ente r the preset PIN
"12345678" o r the PIN which has been notified to you by your system administrator.
Inserting the SmartCard
Do not use force when inserting and removing the SmartCard.
Make sure that foreign o bjects do not fall into the SmartCard reader.
1
a
► Slide the Smart Card carefully into the Smart Card reader (a) in the direction
of the arrow (1), with the chip facing upward.
Fujitsu 59
To Next Page
Loading...
Need help?
General