Troubleshooting and tips
The external monitor remains bl
ank
Monitor
Cause Troubleshooting
Monitor is switched off. ► Switch the external monitor on.
Power s aving has been activated (monitor is
blank).
► Press a key (external keyboard) or tap on
the touchscreen.
Brightness is set to d ark.
► Adjust the brightness of the
monitor.
Screen output is set to the Tablet PC
touchscreen.
► Check w hether the graphics driver settings
are correct or whether an e xternal monitor
has been detected in "Intel G raphics Media
Accele rator Driver for mobile".
The external mo nitor’s AC cable or data cable is
not connected properly.
► Switch off the Tablet PC and the e xternal
monitor.
or
► A forced shutdown (reset) button is
located on the right side of the Micro SD
cardslot:Toachievethesameeffectas
removing the battery, press the reset
button.
► Check whether the AC cable is plugged
properly into the external monitor a nd into
the power outle t.
► Check that the data cable is properly
connected to the Tablet PC and the external
monitor (if it is plugged in with a connecto r).
► Switch on the external monitor and th e
Tablet PC.
The external monitor is blank or the image is unstable
MonitorMonitor
Cause Troubleshooting
The wrong external monitor has been selected
or the wrong screen resolution has been set for
the application program.
► Terminate the application program in
Windows. If the error persists after
terminating the program, use the key
combination for switch ing the screen output
in order to switch to the touchscreen of the
Tablet PC. Chang e the following setting:
► Set the screen resolution: Set th e screen
resolution as described in the documentation
for your operating system.
► Select monitor: Select monitor 1 or 2 as
described in the documentation for your
operating system.
Fujitsu 71
To Next Page
Loading...
Need help?
General