Security functions
Using the Security Lock
SecurityLockAnti-theftprotectionSecurityLock
Your device comes with a Security Lock device for the Kensington Lock Cable. With the
Kensington Lock Cable, a sturdy steel cable, you can protect your device and the port replicator
against theft. The Kensingto n Lock Cable is available as an accessory.
► Fit the Kensington Lock Cable to the
corresponding mechanism on your device.
Configuring password protection in BIOS Setup Utility
Before using the various options for password protection in the BIOS Setup
Utility, please proceed as follows to increase data security:
Make a note o f the passwords and k eep them in a safe place. If you forget your
supervisor password you w ill not be able to access your Tablet PC. Passwords are
not covered by your warranty and a charge will b e made for assistance.
Password prot
ection
Your password can be up to 32 characters long and can contain letters and
numbers. No distinction is made between uppercase and lowercase.
Protecting BIOS Setup Utility (supervisor password
and user password)
If you have opened these o perating instructions on the screen, we recommend
that you print them out. You cannot call up the instructions on th e screen
while you are setting up the password.
BIOSSe
tupUtility
The supervisor passw ord and the user password both prevent unauthorized use of the BIOS
Setup Utility. T he supervisor password allows you to access all of the functions of the BIOS Setup
Utility, while the user password will only give you access to some of the functions. You can
only s et up a user password if a supervisor password has already been assigned.
Calling and using the BIOS Setup Utility is described in the chapter
"
Settings in BIOS Setup Utility", Page 65.
56 Fujitsu
To Next Page
Loading...
Need help?
General