Appendix
RECOVER YOUR SYSTEM WHEN THE HARD
DRIVE IS NOT BOOTABLE
Restore the Recovery Image for Full Hard Drive
Follow the steps in the “Recovering your Recovery Image using Recovery and
Utility (for new hard drive or non-bootable hard drive)” section. You will need the
Bootable Disk an d the Recovery Disk Set for this task.
Utility tool: If applicable for your region, the Utility tool contains tw o op tions:
Hard Disk Data Delete and Partition Creation.
The Hard Disk D ata Delete utility is used to delete all data on the hard disk
and preven t the data from being reused.
NOTE: Do not use the Hard Disk Data Delete utility unless you are absolutely certain
that you want to erase your entire hard disk, including all partitions.
To de lete hard disk data:
1. Click the Hard Disk Data Delete button. The progress bar appears, followed by the EULA screen.
2. Agree to the EULA and click Next.
3. Choose the hard disk from which the data should be deleted in the list of hard disks and click Next.
The Partition Creation utility is used to change the C: and D: drive partition sizes.
To run this utility: (Th is is not an option when using Windows 7.)
1. Click the Partition Creation button.
2. A progress bar appears, followed by the EU LA screen. Agree to the EULA.
3. On the Recovery Tool - Partition Creation screen, move the slider to set disk size, and then click OK.
4. Click Yes in the Partition Creation confirmation dialog.
WARNING: It is highly recommended that you send your product to Fujitsu
Service to replace a hard drive. A mista ke c ould possibly destroy your
computer, your n ew hard drive or both.
104 Fujitsu
To Next Page
Loading...
Need help?
General
Weight and Dimensions
