Fujitsu STYLISTIC Q704

Connecting e xternal devices
Connecting an external monitor
HDMI port (only performance d
ocking cradle and
keyboard docking station)
HDMIport
The HDMI port can be used to connect an external amplifier, LCD TV or a
plasma TV with an HDMI co nnection.
► Connect the data cable to the
external device.
► Connect the data cable to the HD MI port.
Some LCD televisions have only two speakers/speaker ports and therefore
cannot reproduce Dolby Digital or DTS. To p lay back HDMI s ound, you
must change th e HDMI sound settings accordingly.
You can find the settings under Control Panel - Hardware and Sound. Deactivate the
settings f or DTS Audio and Dolby D igital to enable playback of HDMI sound.
External monitor port (VGA) (only performance docking
cradle and keyboard dockin g station)
An analog monitor is connected to the analog external monitor port (VGA). S creen output
is limited to a maximum of two screens at the same time.
MonitorVGAportScreencon
nection
Monitorco
nnection
► Switch off the Tablet PC and t he
external monitor.
► Plug the data cable of the external
monitor into the monitor port.
► First switch on the external monitor and
then switch on the Tablet PC.
You c an also switch back and forth between the external monitor and the LCD
screen of the Tablet PC, s ee "
Touchscreen", Page 24.
You c an display the sa me image on the external monitor and on the LCD
screen of the Tablet PC at the same time.
Fujitsu 69