First-time setup of your device
First-time setup of your devic
e
First- timese tupGettingstarted
Please read the chapter "Important notes", Page 12.
If your de vice is equipped with a Windows operating system, the necessary
hardware drivers and supplied so ftware are already pre-installed.
Before switching it on for the first time, connect the device to the AC voltage using
the A C adapte r, see "
Connecting the AC adapter", Page 18. The AC adapter must
remain connected during the whole of the installation process.
A system test is performed when your device is first s witched on. Various messages
can appear. The display may remain dark for a short time or may flicker.
Please follow the instructions on th e screen.
NEVER switch off your device during the first-time setup process.
The battery must be charged if you want to operate your device using the battery.
When used on the move, the built-in b a ttery provides the device with th e necessary power. You
can increase the operating time by using the available energy-saving functions.
For instructions on how t o connect external devices (e.g. mouse, printer) to your Tablet
PC, please refer t o the o perating manual for your device.
Unpacking and c
hecking the device
If you find tha t damage has occurred during transport, please notify
your local sales outlet immediately!
► Unpack all the individual parts.
PackagingTransport
► Check your d
evice for any visible damage which m ay have occurred during tra nsportation.
You may nee
d to reuse the packaging in future, for example if you
need to tr
ansport your device.
Fujitsu 17
To Next Page
Loading...
