First-time setup of your device
Choose a location
ChoosealocationSetupACadapter
Choose a suitable location for the de vice before setting it up. In doing
so, please follow these instructions:
• Never place the device or the AC adapter on a heat-sensitive surface.
The surface could be damaged as a result.
• Never place the device on a soft surface (e.g. carpeting, upholstered furniture,
bed). This can result in damage caused by overheating.
• The underside of the device heats up during normal op eration. Prolonged
contact with skin can become unpleasant or even result in bu rns.
• Place the device on a stable, flat, non-slippery surface. Please note that the
rubber feet of the device may mark certain types of delicate surfaces.
• Keep other objects a t least 100 mm / 4 inches away from the device
and its AC adapter to ensure adequate ventilation.
• Do not expose the device to extreme environmental conditions. Protect
the device against dust, humidity and heat.
Connecting the AC adapter
MakingreadytouseACadapter
Observe the safet
y notes in the enclosed "Safety/Regulations" manual.
ThesuppliedACc
able conforms to the requirements of the country in which
you purchased yo
ur device. Ma ke sure tha t the AC cable is approved fo r
use in the count
ry in which you intend to use it.
2
► Open the cover o f the DC jack
socket (DC IN).
► Connect the AC cable (1) to the AC adapter.
► Plug the AC cable (2) into a po wer outlet.
► Connect the AC adapter cable (3) to the
DC jack socket (DC IN) of the device.
18 Fujitsu