Connecting external devices
Connecting external devices
Under all circumstances, please observe the safety notes provided in the
"
Important notes " , Page 12 chapter before connecting or disconnecting
any devices to or from your Tablet PC.
Always read the documentation supplied with the device you wish to connect.
Never connect or disconnect cables during a thunderstorm.
Never pull at a cable when disconnecting it. A lways grasp the plug.
Follow the order described below when you connect external devices to
the Tablet PC or separate them f rom it:
With some de vice s, such a s USB devices, it is not necessary to switch off
the Tab let PC and the device before conne cting/discon necting. For more
information about whether or not devices need to be switched off, please refer
to the document ation supplied with your external de vice.
Some of the external devices require special drivers (see the o perating
system an d external device documentation).
Connecting devices to the Tablet PC (or to the cradle / ke ybo ard docking station).
1. Switch off the Tablet PC an d all the external devices.
2. Disconnect th
e A C plugs for the Tablet PC and all the affected devices from the pow er outlets.
3. Connect the cables for all the external devices according to the in struct ions.
4. Plug all the A
C plugs into the power outlets.
Devices,Peripherals,
Disconnecting devices from t he Tablet PC (or f rom t he crad le / keyboard docking station)
1. Switch off the Tablet PC an d all the external devices.
2. Disconnec
t the AC plugs for the Tablet PC and all the affected devices from the power outlets.
3. Disconnect the cables for all the external devices following the instructions.
Devices,Peripherals,
68 Fujitsu