Working with the Tablet PC
Using the energy saving functions
EnergyEnergyBattery
The Tablet PC uses less power when the energy saving features are enabled. You will then
be able to work longer when using the battery before having to recharge it.
The energy efficiency is increased and environmental pollution is reduced.
By choosing the best power options, you can make signi ficant savings and
at the same time help protect the environment.
We recommend the following settings:
Function Operating on AC power Operating o n battery p ow er
Turn off monitor After 10 minutes After 5 minutes
Turn off hard disk(s) After 15 minutes After 10 minutes
Energy saving (S3) After 20 minutes After 15 minutes
Hibernate mode (S4
)
After 1 hour After 30 minutes
► Set the energy savin
g functions in your Control Panel.
► Set the screen saver in your Control Panel.
or
► Keep a finger pressed on th e desktop to display the con text menu. Configure the screen
saver under Change screen saver.
If you need further information a bout an option, you can get help with most settings by
pressing the
?
symbol in the upper right of the screen to open Microsoft Help.
When the Tab let PC is in a power-saving mode, you mu st remember the following:
During power-saving mode, open data is held in m ain memory or
in a swap file on the hard disk.
Never switch off the Tab let PC while it is in a power-saving mode. If the built-in battery
is nearly flat, close all open files and do not go into power-saving mode.
If you do not int end to use your Ta blet PC for a long period of time:
► Exit the power-saving mode if necessary by touching the screen or by switching the Tablet
PC on.
► Close all opened programs and completely shut down the Tablet PC.
36 Fujitsu
To Next Page
Loading...
