Accessories for yo ur Tablet PC (opti
onal)
Settingupthecradle
Select a suitable location for the cradle befo re setting it up. In doing
so, please follow these instructions:
• Placethecradleonaflat, stable, non-slippery surface.
• Never place the cradle or the AC adapter on a heat-sensitive surface.
• Do not expose the cra dle to extreme environmental conditions.
Protect the cradle from du st, moisture and heat.
Connecting the Tablet PC to the cradle
It is possible to connect the Tablet PC to the cradle while it is running.
Disconnect the AC adapter from the Tablet PC before connecting
the Tablet PC to the cradle.
When the Tablet PC i
s connected to the cradle, you must connect
the AC adapter to t
he cradle.
Information for u
sing the performance docking cradle:
• If your Tablet PC
is connected to the performance docking c radle, the micro USB
port of the Tab l
et PC cannot be used. Use the alternative ports of the cradle.
• The HDMI and VG A ports of the performance docking cradle cannot
be used at the same time. If devices are connected to both ports, o nly
the device at the H DMI port can be used.
• The maximum supported resolution for VGA/HDMI is 1920 x 1080 pixels.
► Remove the A
C plug of the AC adapter from the power outlet.
► Remove the AC a dapter cable from the DC jack (DC IN) of the Tablet PC.
Fujitsu 45
To Next Page
Loading...
