FULTON FHE-250 - Local Test Mode

FHE-250 MANUAL 09 2014 ISSUE 2
Page 38
3
LCD:
seg1 Displayed “t”
seg2 to seg4 Percentage of power demand of the cascade
P6 Blinking when testing local device at position of MAXSYS0
P3 Blinking when testing local device at position of MAXSYS1
Button Press: Function:
A for 3 sec. Exit local test mode
D (autorepeat) Decrement power demand
E (autorepeat) Increment power demand
Briey F Set power demand to 0% (absolute minimum).
Briey G
Set power demand to 100% (absolute maximum).
Note: MAXSYS0 refers to a unit with LCD display and MAXSYS1 refers to a unit without display.
3.14.8
LOCAL TEST MODE
A for 3 sec.
A
B
C
E
D
G
F