Furuno DSC-60 - Page 106

AP1-2
4.4.
4.4.
4.
MF/HF SSB MF/HF SSB
MF/HF SSB MF/HF SSB
MF/HF SSB
TRANSCEIVER REMOTRANSCEIVER REMO
TRANSCEIVER REMOTRANSCEIVER REMO
TRANSCEIVER REMO
TE STTE ST
TE STTE ST
TE ST
AA
AA
A
TIONTION
TIONTION
TION
(1) Line Out: 0 dBm, 600 ohms, balanced
(2) Line In: 0 dBm, 600 ohms, balanced
(3) AF Input (Microphone): -46 dBm, 600 ohms, unbalanced
(4) AF Output (Loudspeaker):3 W, 4 ohms
(Handset): 1 mW, 200 ohms
5.5.
5.5.
5.
DISPLADISPLA
DISPLADISPLA
DISPLA
YY
YY
Y
(1) LCD Unit: 120 x 64 dots
(2) Characters 20 characters x 8 lines (1 character: 5 x 7 dot) max.
20 characters x 10 lines (1 character: 5 x 5 dot) max.
30 characters x 10 lines (1 character: 3 x 5 dot) max.
(3) Back-light: Yellow, 8 tones
(4) Contrast: 64 tones
6.6.
6.6.
6.
I/O DI/O D
I/O DI/O D
I/O D
AA
AA
A
TT
TT
T
AA
AA
A
(1) Nav. Data Input: IEC61162-1, current loop; 1 pair/port
(2) DMC: IEC61162-1/RS232C or
DMC OUT/IN/CTR H/C: 3 pairs/port
(3) Received Call Output: RCV BZ OUT/IN/CTR; 3 pairs/port
(4) NBDP: IEC61162-1/RS232C
(5) Printer: Centronics (parallel)
(6) RT (MF/HF Transceiver): IEC61162-1/RS232C,
Line in: 0dBm, 600 ohms,
Line out: 0dBm, 600 ohms,
and other control signals
7. En7. En
7. En7. En
7. En
virvir
virvir
vir
onmental conditiononmental condition
onmental conditiononmental condition
onmental condition
(1) Temperature: -15°C to +55°C
(2) Relative Humidity: 93% ( 40°C)
(3) Category of Equipment Unit
Display Unit: Protected from the weather
8. Power Supply8. Power Supply
8. Power Supply8. Power Supply
8. Power Supply
24VDC (backed up by battery), 1 A, less than 24 W
9. Color9. Color
9. Color9. Color
9. Color
Panel: N3.0 (not changeable)
Cabinet: 2.5GY5/1.5
SPECIFICATIONS