2. SYSTEM INITIALIZATION
2-27
Procedure for E-mail
1. Press the [↓] key to choose Address.
2. Press the [Enter] key to open the e-mail address entry window.
3. Enter recipient’s e-mail address.
4. Press the [Enter] key to close the window.
5. Press the [↓] to choose Remarks.
6. Press the [Enter] key.
7. Enter remarks, using up to 20 characters.
8. Press the [Enter] key to close the window.
9. Press the [Esc] key to return to the station list.
10. To enter another “E-mail” station repeat the procedure from step 4 on page
2-24.
11. Press the [Esc] key three times to return to the standby display.
To Next Page
Loading...
