2. SYSTEM INITIALIZATION
2-36
16. Press the [↓] key to choose LES ID.
17. Press the [Enter] key to open the LES ID entry window.
18. Enter ID of AOR-W.
19. Press the [Enter] key to close the window.
20. Repeat steps 17-19 to enter AOR-East, POR and IOR.
21. Press the [↓] key to choose “To:.”
22. Press the [Enter] key to open the “to” header entry window.
23. Type appropriate “To” header (for example, TO:, to+, etc.).
24. Press the [Enter] key to close the “to” header entry window.
25. Press the [↓] key to choose “Cc:.”
26. Press the [Enter] key to open the “Cc” header entry window.
27. Type appropriate “Cc” header (for example, CC:, cc+, etc.).
28. Press the [Enter] key to close the “Cc” header entry window.
29. Press the [↓] key to choose “Subject:.”
30. Press the [Enter] key to open the subject entry window.
31. Type appropriate Subject header (for example, Subject:, subject+, etc.).
32. Press the [Enter] key to close the window.
33. Press the [↓] key to choose “Separator.”
34. Press the [Enter] key to open the separator entry window.
35. Type appropriate Separator (for example, blank space, STX:, etc.).
36. Press the [Enter] key to close the window.
37. Press the [↓] key to choose SMS.
38. Press the [Enter] key to open the SMS window.
39. If it is necessary to enter special Prefix “sms+” before telephone number,
enter the keyword now. For example, for Singapore Telecom enter
sms+8190123456789.
40. Press the [Enter] key to close the window.
41. Press the [↓] key to choose “Attach File (MIME).”
42. Press the [Enter] key to open the Attach File (MIME) window.
43. Choose ON(BASE64), ON(UUENCODE) or OFF as appropriate.
BASE64: General text converter
UUENCODE: UNIX text converter
44. Press the [Enter] key to close the window.
45. Press the [Esc] key four times to return to the standby display.
To Next Page
Loading...
