2. OPERATION
2-5
2.5 LIST Screens Overview
LIST display mode shows the [ACTIVE ALERT] list, [ALERT LOG] and [DEVICE LIST]
in cyclic order with the display mode currently in use.
Press the LIST key to cycle through the lists in the order shown below. Press and hold
the LIST key to cycle through the lists in reverse order.
2.6 Display Modes Overview
The available display modes are GPS, THD, ROTI and SPD.
Note: The SPD display mode is available only for non-IMO compliant vessels. If the
device mode is changed to [MERCHANT] and the SPD display mode is in use, it is
automatically changed to the THD display mode. Consult your local dealer for details.
How to change the display mode
Press the DISP key to cycle through the display modes. The order in which the display
modes are shown is: GPS o THD o ROTI o SPD o GPS...
Note: Some display modes may not be available, depending on vessel configuration.
The figures below shows all four available display modes.
Main screen [ALERT LIST] [ALERT LOG] [DEVICE LIST]
1
104.
GP-D3D 9.6 31
12.34
13.57
56.78
123456.78
1
104.
GPS mode THD mode
ROTI modeSPD mode*
*: Non-IMO type only
NORMAL NORMAL
NORMAL
GP-D3D
GP-D3D
To Next Page
Loading...
