Furuno SC-130 - Maintenance Menu; How to Find Unit Information; How to Backup User Settings

3. MAINTENANCE, TROUBLESHOOTING
3-3
3.4 Maintenance Menu
The [MAINTENANCE] menu contains items such as diagnostic tests, unit information
and other maintenance-specific menus. You can also save or load your user settings
from this menu.
To access the [MAINTENANCE] menu, open the
[MENU], then select [MAINTENANCE]. The [MAINTE-
NANCE] menu appears.
3.4.1 How to find unit information
You can view your equipment’s details from the [INFORMATION] menu. The dis-
played details include handy information such as program numbers and serial num-
bers.
1. From the [MAINTENANCE] menu, select [INFORMATION], then press the ENT
key.
2. Select the unit whose information you want to view, then press the ENT key.
3. Select the part of the unit whose information you want to view, then press the ENT
key.
Items shown in gray are either not selectable, or have no information to view.
Press S or T to scroll through the displayed information.
3.4.2 How to Backup User Settings
If a USB Flash Memory is connected at installation (see section 1.5.5), the SC-70/SC-
130 can import or export user settings via external USB flash memory. This allows you
to apply the same settings to multiple units, or recover settings if they are accidentally
changed.
Note: The menu is inoperable while importing or exporting settings. Also, the import/
export procedure cannot be stopped once it starts. For safety, conduct these opera-
tions while moored safely.
To import or export settings, do the following:
1. Open the [MENU].
2. Select [MAINTENANCE], then press the ENT key.
3. Select [IMPORT/EXPORT], then press the ENT key.
4. Select [IMPORT USER SETTINGS] or [EXPORT USER SETTINGS] as appropri-
ate, then press the ENT key. A confirmation pop up window appears.
5. Select [YES] to import/export the user settings, [NO] to cancel the import/export.
If [YES] is selected, a progress widow appears, showing the overall progress of
the import/export.
If an error occurs during the import/export, an error message appears. Referring
to the table on the following page, take the appropriate action.