⚫
Use Compatibility Checker to obtain information about the cables and optical
modules supported by the LOM ports.
⚫
The LOM ports support NC-SI, WOL, and PXE.
⚫
The LOM ports do not support forced rates.
⚫
The electrical LOM ports cannot be connected to power over Ethernet (PoE)
devices (such as a switch with PoE enabled). Connecting a LOM port to a PoE
device may cause link communication failure or even damage the NIC.
⚫
The electrical LOM ports (GE electrical ports) do not support SR-IOV.
⚫
Forcibly powering off a server will cause intermittent NC-SI disconnection and
disable the WOL function of the LOM ports. To restore the NC-SI connection,
refresh the iBMC WebUI.
To Next Page
Loading...
General