118
→ GO to TABLE OF CONTENTS
Warning setting
Mixing warning normal reset
The warning display at power ON can be turned
ON/OFF for each function. Use by setting functions
which may be dangerous if operated at power ON
to ON. Initial setting is all ON (Buzzer).
● Tap the [Warning setting] button in the
Linkage menu to call the setup screen
shown below.
The settings can be changed
individually. When set to
[Inhibit], a warning is not
displayed at power ON.
Type 1
Type 2
Type 3
"Vibrator" type
If the following types are selected, the transmitter
will vibrate during the warning.
●Return to
Linkage menu
WARNING
I
t is extremely dangerous to
unnecessarily inhibit essential
warnings.
■ Careless spinning of propellers or rotors poses a
danger of serious injury or death.
To Next Page
Loading...
