FUTABA T16IZ - RudderExpert

194
→ GO to TABLE OF CONTENTS
RudderExpertRudderExpert
The rudder Expert menu allows for further renement of the tail rotor gyro performance. "Rudder Expert" screen from the "EXPERT MENU
3D" screen.
(1) RUD Ntr: Rudder servo neutral setting
This parameter is used to set the neutral position of the rudder servo. Po-
sition the rudder servo arm as perpendicular as possible to the tail rotor
pushrod prior to making adjustments with this parameter.
Settingranges:-240~0~+240Initialvalue:+0
(2) EXP. AVCS / EXP. NORM: Rudder exponential
This parameter sets the feel of the tail rotor control around center. When
set to [0] the control curve is linear. Using a [+] value the tail rotor will be
more sensitive around neutral conversely, using a [-] value will soften the
feeling around neutral. The RUD EXP parameter in your transmitter can
also be used to tune the tail rotor to a desired feeling.
Settingranges:-100~0~+100%Initialvalue:AVCS=-20%,NORM=-20% 
Sports=AVCS-60%/NORMAL-40%,3D=AVCS-20%/NORMAL-20%>