FUTABA T16IZ - LockDisplay; RfOffMode

20
→ GO to TABLE OF CONTENTS
Lock Display
Temporarily activating this function makes it impossible to change data by accidental input during
ight.
RF o mode
Model operation is disabled, but display operation without RF signal output is allowed. (Reduces
battery power consumption during set-up.)
Display unlock
HOME/EXIT Press and hold
HOME/EXIT Press and hold
Restart the power
to transmit RF
signals.
"RF o󱐯" Model
operation is not
possible, but only
panel operation is.
U.MENU/MON.
Press and
Power ON
Lock Display
Howtolock
Howtounlock
1. With the home screen displayed.
2. Press the HOME/EXIT button for about 1
second. "Key Icon" is displayed and the
keys will be disabled.
1. Press the Home/Exit button for about 1
second, and the display will then become
unlocked.
CAUTION
The T16IZ's touch screen is very sensitive. To
avoid accidentally activating it during a flight, it
is suggested that it be locked. Due to the touch
screen's sensitivity, allowing it to be touched
during flight by a neck strap hook, servo extension,
or even your hand could be dangerous. Please use
the Touch Display lock for added safety during
flight.