FUTABA T16IZ - StickAlarm

85
→ GO to TABLE OF CONTENTS
Tapping this will change
INH to ON and activated.
Stick alarm
An alarm (single beep) can be sounded at the
specied throttle stick position.
●Alarm function ON/OFF can be set by switch.
Tapping this will pull up the hardware selection
screen. Select the switch and ON-OFF direction if
turning the function ON-OFF by switch.
This is the current
position display bar for
the throttle stick.
This is the throttle stick
alarm position. Push the
throttle stick to the desired
position and tap the value.
Range:
（Low）0 ～ 100（High）
If the throttle stick
reaches the yellow
line, an alarm will
sound.
If the throttle stick
reaches the desired
position , an alarm
(single beep) will
sound.
●Return to Linkage menu