69
increase the minute selection, to a maximum of 99 minutes. Pressing downward will decrease the minutes
to a minimum of 00.
7) When satisfied, press the SELECT key again to move to the seconds adjustments. The seconds are
adjustable from a minimum of 00 to a maximum of 59.
8) Pressing SELECT once again will move to the timer starting method screen. Press the DATA INPUT lever
upward or downward to select accordingly. The options are:
- SWA- Switch A(ON in the up position)
- SWB- Switch B(ON in the up position)
- SWD- Switch D(ON in the up position)
THR- Throttle stick movement activation, activates at approximately1/3 throttle
ON- The timer is always activated
Note: To stop the timer when activated, simply move the respective switch or stick to the opposite position.
the timer will stop accordingly. To reactivate the timer, move it to the up position once again.
To reset the timer, press and hold the DATA INPUT lever momentarily when the timer is displayed on the
LCD.
9) Press and hold the END button to exit the programming menu.
To Next Page
Loading...
Need help?
General
