Garmin G1000 Line Maintenance Manual

______________________________________________________________________________
____________________________________________________________________________
LMM for the Kodiak 100 Page 3-29
190-02102-00 Rev.4
10. Remove the SD card from the bottom slot of the MFD if desired.
11. Remove and reapply power to the system.
12. Press the ENT Key or the right-most softkey on MFD display to acknowledge the
startup screen.
13. Turn the large FMS Knob and select Aux.
14. Turn the small FMS Knob and select the Databases.
15. Make sure the standby databases transferred and are now in the Active column.
Figure 3-24. Aux - Databases’ Page - Updated Databases
16. To manually activate any databases that did not transfer to the active column:
a) Push the FMS Knob. The first database title on the screen will be selected.
b) Turn the small FMS Knob as necessary to select the database title.
c) Press the ENT Key. A cyan double-sided arrow will appear indicating the
standby database will become active.
d) Remove and reapply power to the system.
Uncontrolled if Printed

Garmin G1000 Specifications

General

Display Type	LCD
Primary Flight Display (PFD)	Yes
Multi-Function Display (MFD)	Yes
Terrain Awareness	Yes
Autopilot Integration	Yes
Integrated Flight Deck System	Yes
Weather Radar	Optional
Traffic Advisory System (TAS)	Optional
Terrain Awareness and Warning System (TAWS)	Yes
Resolution	1024 x 768 pixels
Weather Data	Yes
Navigation	Yes
AHRS	Yes
Air Data Computer (ADC)	Yes
Interfaces	ARINC 429, RS-232
Certification	TSO certified
Traffic Information	Optional (requires ADS-B or TCAS)