(CIF, WCIF, HD1, WHD1, D1, WD1,
720P).
Quality – this drop-down list enables
you to select the quality of the
snapshot on a scale of 1 to 8 (where 1
is best).
Upload Type – checkboxes that allow
you to select whether the snapshots
are to be uploaded to FTP and/or
Server.
Image Quantity – numeric text field to
key in the number of snapshots that
will be taken.
Interval – numeric text field to key in
the interval (in seconds) between
snapshots.
Copy To – this feature allows you to
copy the current snapshot settings for
this channel to another channel, thus
allowing you to easily and quickly
replicate the snapshot task settings.
Once you have selected the channel to
copy to, click on the (Copy) button to
make the copy.
DEFAULT SETTINGS:
Checkbox – Unselected
Setting this enables the device to automatically
take snapshots whenever an alarm event
occurs.
Clicking the (Setup) button displays the snap
link settings page which allows you to
configure the settings for the snapshots to be
taken where there is an alarm event.
In the configuration screen, you will be able to
configure the snapshot settings for each
individual camera channel in turn:
Channel – this is a drop-down list
allowing you to select a particular
camera channel. The associated
snapshot settings for this channel will
be displayed for editing.
Enable – if the checkbox is selected,
then this camera channel is included
when the Y58 performs the snapshots.
To Next Page
Loading...