Resolution – this drop-down list
enables you to select the resolution for
the snapshots. Available options are
(CIF, WCIF, HD1, WHD1, D1, WD1,
720P).
Quality – this drop-down list enables
you to select the quality of the
snapshot on a scale of 1 to 8 (where 1
is best).
Upload Type – checkboxes that allow
you to select whether the snapshots
are to be uploaded to FTP and/or
Server.
Snap Quantity – numeric text field to
key in the number of snapshots that
will be taken.
Interval – numeric text field to key in
the interval (in seconds) between
snapshots.
Copy To – this feature allows you to
copy the current snapshot settings for
this channel to another channel, thus
allowing you to easily and quickly
replicate the snapshot settings for the
different camera channels. Once you
have selected the channel to copy to,
click on the (Copy) button to make the
copy.
DEFAULT SETTINGS:
Disabled/not applicable.
These settings are used for snapshots which are
taken manually by the user. Clicking the
(Setup) button displays the snap link settings
page which allows you to configure the
settings.
In the configuration screen, you will be able to
configure the snapshot settings for each
individual camera channel in turn:
Channel – this is a drop-down list
allowing you to select a particular
camera channel. The associated
snapshot settings for this channel will
be displayed for editing.
Enable – if the checkbox is selected,
then this camera channel is included
when the Y58 performs the snapshots.
To Next Page
Loading...