The device records video cyclically. This drop-
down list enables you to specify the conditions
whereby older video will be overwritten:
By Days – video older than a specified
number of days will be overwritten by
newer video. Selecting this will enable
a numeric text field where you can
specify the number of days to keep
video retained before overwriting.
By Capacity – video will be retained as
long as storage capacity is available. As
device storage capacity runs out, older
video data will be overwritten by newer
video data in First in First Out (FIFO)
format.
Never – video will never be
overwritten. To ensure that the device
still has storage to record new video,
you will have to download and remove
the older video on a regular basis.
DEFAULT SETTINGS:
By Capacity
Note - The system will give you an error when
the storage is full up to the set value. This option
only works when “Overwrite” is set to never.
DEFAULT SETTINGS:
Not Applicable
Checkbox – if selected will enable the pre-
recording feature, so that when alarms/events
occur, video data leading up to the incident is
available as well.
Selecting this checkbox will enable a drop-
down list where you can specify the duration of
video to pre-record.
DEFAULT SETTINGS:
Checkbox – Unselected
To Next Page
Loading...