176
Chapter 9: Travel Tips
www.gateway.com
To create a startup password:
1 Restart your notebook. As soon as you see a startup screen, press F2.
The BIOS Setup utility opens.
2 Open the Security menu.
3 Highlight Set Supervisor Password, then press ENTER and follow the
instructions. You must set the supervisor password in order to set
the user (startup) password.
4 Highlight Set User Password, then press ENTER and follow the
instructions. This is the password you need to enter at startup.
5 Highlight Password on boot and press ENTER.
6 Highlight Enabled, then press ENTER.
7 Open the Exit menu, highlight Exit Saving Changes, then press ENTER.
When you start your computer, you are prompted to enter the user
password you set in Step 4.
Power
■ Take your AC power adapter to recharge the battery. If you are traveling
internationally, take power plug adapters.
■ Take a portable surge protector to protect your notebook from power
surges.
■ To get the best performance from your notebook, avoid using the battery
whenever possible, monitor the battery charge, and use the most efficient
power management settings.
■ For information on conserving battery power, see “Conserving battery
power” on page 161.
■ For information on using alternate power sources, see “Using alternate
power sources” on page 162.
■ For information on monitoring the battery charge, see “Monitoring
the battery charge” on page 156.
To Next Page
Loading...
Need help?
General
