CHAPTER 3: Replacing notebook components
102
Replacing the LCD assembly lid
Tools you need to complete this task:
v
Screws removed during this task:
To replace the LCD assembly lid:
1 Complete the steps in “Preparing the notebook” on page 55.
Flat-blade driver Scribe or non-marring tool- OR -
Phillips #0 screwdriver
6 black M2.5×8 (LCD
front panel)
2 black M2.5×8
(Hinge top)
2 black M2.5×8 (Hinge
bottom)
2 black M2.5×3
(Keyboard cover)
2 black M2.5×5 (inverter)
2 black M2×3 (Webcam) 2 black M2.5×5 (Lid
latches)
4 black M2.5×5 (LCD
panel to LCD panel lid)
4 black M2.5×3
(Keyboard)
1 long black (Keyboard)
To Next Page
Loading...
