www.gateway.com
79
Replacing the keyboard
Tools you need to complete this task:
v
Screws removed during this task:
To replace the keyboard:
1 Complete the steps in “Preparing the notebook” on page 55.
2 Remove the keyboard cover by following the steps in “Replacing the keyboard
cover” on page 76.
3 Remove the five keyboard screws.
Important
Note the location of the long screw.
Flat-blade driver Scribe or non-marring tool- OR -
Phillips #0 screwdriver
4 black M2.5×3
(Keyboard)
2 black M2.5×3
(Keyboard cover)
1 long black (Keyboard)
Screw
Screw
Long
screw
Screw
Screw
To Next Page
Loading...
