www.gateway.com
61
Replacing the processor
Tools you need to complete this task:
v
Additional materials you need to complete this task:
• X-23-7762 thermal grease
Screws removed during this task:
To replace the processor:
1 Complete the steps in “Preparing the notebook” on page 55.
2 Remove the cooling assembly by following the steps in “Replacing the main cooling
assembly” on page 58.
3 Use a flat-blade screwdriver to turn the processor lock screw 1/4-turn
counter-clockwise.
Phillips #0 screwdriver
Flat-blade driver
4 black M2×5 (main
cooling assembly)
(Optional)
To Next Page
Loading...
