www.gateway.com
87
9 Remove the old webcam.
10 Install the new webcam.
11 Replace the screws that were removed in Step 8.
12 Reconnect the webcam cable.
13 Press the LCD panel front and back together. Press the two halves together in several
places until they click in place. You should find no loose spots or spots where the
two halves do not meet.
14 Replace the LCD panel assembly screws removed in Step 5.
15 Replace the rubber inserts removed in Step 4.
16 Replace the keyboard cover by following the steps in “Replacing the keyboard cover”
on page 76.
To Next Page
Loading...
