CE
Label
This label identifies the classification of the Model in accordance with IEC 60825-1. It is
located on the rear of the machine’s cabinet.
Protection Window Label
This label indicates the protection wavelength. You can find this label in the lower right corner of
window.
1.5 Safety Measures
LASER RADIATION WARNING: Exposure to laser radiation may result in physical burns
and severe eye damage. Proper use and regular maintenance of this machine is
important to the safety of all people in the immediate area.
Prior to operation, carefully read and familiarize yourself with the warning labels located
on both your laser system and in this manual.
Never leave the machine unattended during the laser cutting process. The laser may
ignite combustible materials. A well-maintained fire extinguisher and operational smoke
or fire detector should be kept in the vicinity of the machine.
Caution—Use of controls or adjustments or performance of procedures other
than those specified herein may result in hazardous radiation exposure.
NOTE
SmartGUARD™ is an optional fire detection alarm system developed by GCC. Contact
your local GCC authorized distributor for more details for having this safety option
installed onto your system.
Always wear safety goggles when the laser system is in operation. Reflective materials
such as mirrors, enameled brass and anodized aluminum may partially-reflect some of
the invisible laser radiation. Severe eye damage may occur if appropriate safety goggles
are not worn.
To Next Page
Loading...
