232001250G(06)
1.4 Safety Labels
According to CDRH standards, all fixed or removable covers that allow access to a laser beam must have
the appropriate laser warning labels attached to them. These warning labels must be clearly visible to the
operator prior to removing the cover. Additional labels must be applied inside of the machine and be visible
in the event the covers are removed. A label clearly displaying the manufacturer’s name, date of
manufacture, description of product, model number, serial number, and compliance statement must be
attached to the outside of the machine.
In compliance with CDRH standards, the required warning labels are affixed at the time of manufacture to
the LaserPro X380 in the appropriate locations. These labels are not to be modified in any way or removed
for any reason. Please familiarize yourself with the specific labels and their locations on the machine.
Below is a list of all the safety labels and their locations on the machine.
Product Label
This label is located at the right-back side of machine. All the product information such as Serial Number,
Model Numbers, Laser Power and Electric power can be found here. Before requiring any tech support,
always provide service person the information on this label.
To Next Page
Loading...
