GCC Technologies X380 - Using the Laserpro X380 Print Driver

54 232001250G(06)
Corel Draw Example (Color Management)
The following is an example of how to properly disable Color Management in the graphics software. CorelDraw is
the designated graphics software used for this example. For other graphics software, you will need to access the
corresponding Color Management page.
1) From the primary menu, click TOOLS  COLOR MANAGEMENT and CorelDraw’s Color
Management will appear.
2) Under the Style pull down menu, select COLOR MANAGEMENT OFF.
3) Click OK to complete the color management adjustments.
5.2.3 Using the LaserPro X380 Print Driver
Now after you have properly set the Page and Layout and Color Management of your graphics software, you
are ready to configure the details of your actual job through the LaserPro X380 Print Driver. The LaserPro
X380 print driver allows you to adjust your cutting options. After you have setup your image, design, or text to
be processed in your software application, you can access the LaserPro X380 print driver by going to FILE 
PRINT  PROPERTIES.