Chapter VII - Optional Items
When purchasing the LaserPro X380 from your local authorized GCC distributor, you will be provided a chance to
purchase optional items to enhance your experience with your system. If anytime after the purchase of your X380,
would you like to purchase any optional item, please contact your local authorized GCC distributor.
7.1 Air Extraction System Option
To properly remove dust, vaporized materials and chemical smoke from the working area and machine, it is
necessary to install a suitable air extraction system. The air extraction system and other components are
readily available from your local authorized GCC distributor or you can elect to purchase and install one
yourself with components found at your local industrial supply store.
LaserPro's Air Extraction Systems are specifically designed to prevent personnel from inhaling hazardous
fumes and dust generated by the laser process. Available for all LaserPro engravers, the LaserPro Air
Extraction System represents the latest in fume extraction and odor reduction technology for all types of
applications. Quiet operation, high vacuum capacity, compact design and long life expectancy are but a few
outstanding features. Each LaserPro Air Extraction System is powered by a maintenance-free, continuous-
running turbine. In order to ensure personnel safety and legal compliance, the LaserPro Air Extraction System
is CE-compliant for Europe and ETL-certified for the United States and Canada. To purchase a LaserPro Air
Extraction System, contact your local authorized GCC distributor
INSTALLATION (Self-Assembled Unit):
1) Purchase an exhaust system at your local industrial supply store, we recommend you have a contractor
install the exhaust system. We highly recommend you install the exhaust system outside of the building
for both noise considerations and if it does not possess filtering capabilities.
2) Mount the exhaust system in an obvious and accessible location, not too far from the X380, so it can be
routinely switched on prior to laser engraving. The maximal distance you should mount the exhaust
system away from the X380 depends on the blower’s vacuum capacity. We recommend you consult
with the vendor regarding the unit’s vacuum force, maximal distances, based on the available models.
3) Connect rigid and smooth walled tubing such as PVC or sheet metal with an 8” diameter to the
ventilation opening located on the rear side of the X380. (As shown in the picture below). Try to keep
this tubing as straight as possible as bends reduce the exhaust efficiency. Use the appropriate sized
tube clamps and sealants to ensure a tight and secure attachment.
To Next Page
Loading...
