GCC Technologies X380 - Laserpro X380 Specification Sheet

- 90 - 232001250G(06)
10.2 LaserPro X380 Specification Sheet
X380
Models
X380RX
Wattage
80W
100W
Laser source
Sealed CO2 Laser
Cooling
Water Cool
Working Area
38 x 24 in. (960 x 610 mm)
Max. Part Size (W x L x
H)
All doors closed
41 x 25 x 6.5 in. (1041 x 635 x 165 mm)
All doors open
41 x ∞ x 6.5 in. (1041 x ∞ x 165 mm)
Table size
42.7 x 29.5 in. (1085 x 750 mm)
Dimensions
70.8 x 42.9 x 40 in. (1800 x 1092 x 1017mm)
Drive
Closed-loop DC servo control
Maximum Motor Speed*
40 IPS
Speed Control
Adjustable from 0.1~100% (Up to 16 color-
linked speed settings per job)
Power Control
Adjustable from 0~100% (Up to 16 color-linked
power settings per job)
Z-axis movement
Automatic
Computer Interface
Standard pointer port and USB adaptor
Safety
Class 2 for red pointer
Facility Requirement
Power Consumption
1540W
Water Chiller
Water Chiller is required
Air Extraction System
External exhaust system is required
 Caution—Use of controls or adjustments or performance of procedures
other than those specified herein may result in hazardous radiation
exposure.
 Specifications are subject to change without prior notice.

Speed is not equal to throughput. See dealer or visit
www.GCCworld.com
for more details.