GCC Technologies X380 - Page 90

79 232001250G(06)
 Sensitivity: The sensitivity of the SmartGUARD is adjustable. The user can select the delay time from 1
second to 9 seconds when a fire is detected until alarm activation and automatic system shutdown. As an
example, if the firmware is set to 1 second, then the SmartGUARD fire alarm will alert and automatically
shutdown the laser system 1 second after detecting a fire.
 StowCarriage: When set to "Yes", the lens carriage will move away from the source of the fire before
automatic shut down.
WARNING
Select disable it to disable the SmartGUARD fire alarm completely. The result is
equivalent to not having the SmartGUARD fire alarm installed.
S m a r t GU A RD Se tt i ng Pa g e
Re l e v a n t Bu tt on
F un c t i on
F1 (Back)
Back to previous page
F4 (Save)
Save your current settings
/ Directional
Adjust the value for that selections
/ Directional
Adjust the value for that selections
☼ Navigating page:
Main Work Page
Functions Page
Select <Machine
Setting> from the
menu
Press F4
Machine Setting
Page
Select <SmartGUARD>
from the menu
SmartGUARD