GE 30522EE1 - Security Code and Call Screening

Answering system
38
Security code for remote access
Your answering system allows you to program a 4-digit security code
to get access to the system through any touch-tone telephone. The
default security code is 0000.
To view the current remote code:
1. Press .
2. Press or to select ANS SYSTEM and then press .
3. Press or to select SETTINGS and then press .
4. Press or to select REMOTE CODE and then press .
5. Press again to select VIEW CODE. The screen displays the
current remote code.
To change the remote code:
1. Press .
2. Press or to select ANS. SYSTEM and then press .
3. Press or to select SETTINGS and then press .
4. Press or to select REMOTE CODE and then press .
Press or to select CHANGE CODE and then press .
5. Use the dial key pad to enter a new 4-digit security code and then
press .
6. Enter the code again to conrm and then press .
Call screening
When the answering system answers a call, you can listen at the
telephone base while the caller leaves a message.
At the telephone base:
The message automatically plays on the telephone base. Use the
button to adjust speaker volume.
From a cordless handset:
1. Press the button. The caller’s voice will be heard while the
answering system is recording the message.
2. To intercept during handset screening, press button on the
handset. The answering system will automatically stop recording
when you do so.